Beronet BF4004S0Box 4 BRI/S0 modular Gateway - expandable with one additional Module

The berofix box is a powerful and flexible hardware solution to connect ISDN (BRI, PRI) and GSM lines to any SIP based VoIP system. The berofix box is the external aternative to the cards. Due to the modular concept you can mix PRI, BRI and GSM ports on one card with full below described features which makes the berofix cards very unique. The berofix Boxes supports the following hardware DSP based Voice-Processing features:

Features:

• BF400box boxed Baseboard
• BF4S0 Module (INCLUIDO). Expandible con otro módulo compatible
• G.168/G.165 Echo cancellation with echo path change detection, up to 128ms
• Codec translation: G.723.1 and Annex A, G.729a, G.726, G.711u/a
• DTMF detection and generation
• T.38 fax relay (V.27,V.29 and V.17)
• SIP over TCP with SRTP and TLS (available Q1 2010)
• Hardware Conferencing (available Q1 2010)
• DSS1, EuroISDN conform (features set: COLP,CFU/CFB,CFNRY ...) (available Q1 2010)
• Q.SIG Basic-Features set: CNIP,CNIR,CONP (available Q1 2010)
• PCM Bus interconnection between berofix cards to enable hardware bridging for transparent voice,data and Fax transmission via optional PCM-Bus cable. (available Q1 2010)

The berofix Boxes are available in 3 different channel densities: the berofix 400 (4-16 Channels), berofix 1600 (16-64 Channels) and berofix 6400 (64-128 Channels). See table below to check max. Channel densities depending of the Media Functions you are using. In "berofix Channel Option" below select your baseboard which fits to your demand.

 

berofix Family Full Featured Channel Densities

Each berofix Boxes can carry up to two LineInterfaces. The following Lineinterfaces are available and can be used in any combination on the berofix baseboards:
• BF4S0, 4 Port BRI module
• BF1E1, 1 Port PRI module
• BF2E1, 2 Port PRI module
• BF1GSM, 1 Port GSM module (available in Q2 2010)
• BF2GSM, 2 Port GSM module (available in Q2 2010)