General
BluetoothBluetooth 5.1
Max. number of associated STAs 256Input power supply 48 V DC/0.6 A power supply PoE (802.3af)
WLANRG-AP820-L(V3)
Recommended maximum number of active devices per AP120
Maximum number of BSSIDs32 (up to 16 BSSIDs per radio)
STA managementSSID hiding Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote intelligent perception technology (RIPT) Intelligent client identification technology Intelligent load balancing based on the STA quantity or traffic
STA limitingSSID-based STA limiting Radio-based STA limiting
Bridge VlanCompatible
SecurityRG-AP820-L(V3)
Authentication and encryptionRemote Authentication Dial-In User Service (RADIUS) PSK, web, 802.1X, WPA, WPA2, and WPA3 authentication SMS authentication (used with the RG-WS series wireless access controller) MAB authentication (used with the RG-WS series wireless access controller) WEP (64/128 bits), WPA-Personal, WPA-Enterprise, WPA2/WPA3(AES), WPA2-Personal, WPA2-Enterprise, WPA3-Personal (WPA2/WPA3 transition mode), WPA3-Enterprise (CCMP), WPA3-OWE, WPA3-OWE transition mode
Data frame filteringAllowlist, static blocklist, and dynamic blocklist
ACLDynamic ACL assignment
CPPCompatible
NFPPCompatible
Routing and SwitchingRG-AP820-L(V3)
IP serviceStatic IPv4 address IPv4 DHCP Client FTP ALG and DNS ALG
MulticastMulticast-to-unicast conversion
IPv6 basicsIPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping IPv6 DHCP Client
IP routingIPv4/IPv6 static routing
VPNPPPoE Client IPsec VPN
LLDPLLDP LLDP-MED LLDP-PoE
ManagementRG-AP820-L(V3)
User access managementConsole, Telnet, SSH, SNMP and TFTP-based management
Fat/Fit/Cloud mode switchoverWhen the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet. When the AP works in Cloud mode, it can be managed through Ruijie Cloud.
Max. power consumption 12.95 WOperating temperature –10°C to +50°C (14°F to +122°F)
